|
Other products by Lightobject
 reviews
RF Discount
- buy 5 to 24, save 7.5%
- buy 25 to 100, save 10%
- buy 101 to 500, save 15%
- buy 510 to 2000, save 25%
- buy 2200 to 5000, save 35%
|
|
Key Features of the 8A
- Three modes: Toggle, Momentary,Latched
- Encode/Decode to avoid interference
- Individual relay
- Can be programmed to handle two different modes
Specification
- Distance: 150M(450 feet)
- Power supply: 12V
- Encode/Decode: Yes(Learning Code)
- Control Type: Quad mode:( Momentary, Toggle, Latch, Momentary+Toggle)
- Relay: 10A/125VAC, 10A/14V DC
- Receiver Board Size: 8cm x 10cm x 3cm Remote
- Size: 5cm x 12.5cm x 2cm
Modes:
- Toggle: Press=On, Press again=Off
- Momentary: Press=On, Release=Off
- Latched: Press=On, Release=On (locked)
|
Model: |
RF8A |
|
Description: |
8Ch RF Remote controller |
|
Channel: |
8 |
|
Chipset: |
1527 |
|
Frequency: |
433MHz |
|
Range: |
200M~300M |
Average Rating:
(based on 1 review)
|
|
Showing 1 Review:
|
|
by Stuart Fields
on 5/12/2011
|
8 bit RF controller
The hardware is good. I'm using it for wireless control of a scissor lift. However, there is no documentation shipped with the unit. The programming instructions provided via a forum are inaccurate. Vendor response is poor. If the documentation and trouble shooting assistance was better I would give it an excellent rating.
|
|
|
Review and Rate this Item
|
|