Element E5 DSP upgrade kit for K40/D40


Other products by : Lightobject
 Item# :   LSR-E5K40DSPKIT

  Price :   $335.00
Element E-5 DSP upgrade component
  • DC 24V 5A Switching Power Supply. Good for CNC stepping motor and water pump - ($30.00)
  • Proximity Limit Sensor Switch (C2) - ($2.00)
  • Emergency Push Button Switch with lock - ($9.00)
  • 3 Digit Mini Blue LED DC 100mA Meter. Ideal for CO2 Laser Power Indicator (100mA) - ($11.00)
  • 2405S DC-DC 5V (2Watt) Isolated Power Module. Ideal for 24V system - ($8.50)
  • 3 Wire Limit Switch/Sensor Cable - ($1.00)
  • 18mm Laser Head w/Air Assist. Ideal for K40 Machine - ($15.00)
  • Mini 2 Phase 1.5A 1-Axis Stepping Motor Driver - ($56.00)
  • 2 Wire Limit Switch/Sensor Cable - ($2.00)
  • Single Micro Limit Sensor Switch B1 - ($1.00)
  • 5X8 Silicon Flex Tube for Air Assistance or Water Cooling - ($4.50)
  • DSP Laser Controller Card Element-5 E5 - ($195.00)
 Quantity :  
 

Description 

This is a complete upgrade kit for the small laser machine K40 Co2, also named D40. It can also apply to other small laser machines of similar specifications.  After the upgrade is completed, the K40 will become a great machine able to produce detailed images from engraving. Plus, you can do precise cutting on the same or separated layer.

 

Items included: 

 

  • 1x Element E-5 DSP Controller card
  • 1x DC 24V 5A Switching Power Supply. Good for CNC stepping motor and water pump
  • 1x 18mm Laser head w/ air assisted. Ideal for K40 machine
  • 2x Mini 2 Phase 1.5A 1-axis Stepping Motor Driver
  • 1x Emergency Push Button Switch with lock
  • 1x 3 digit Mini Blue LED DC 100mA meter. Ideal for CO2 Laser power indicator(100mA)
  • 10ft 3 wires Limit switch/ sensor cable
  • 10ft 2 wires Limit switch/ sensor cable
  • 1x Proximity Limit Sensor Switch (C2)
  • 1x Single Micro Limit Sensor Switch B1
  • 1x 2405S DC-DC 5V (2Watt) Isolated Power Module. Ideal for 24V system
  • 10ft 5X8 Silicon Flex Tube for Air Assistance or Water Cooling

Pay phone support service is available here.

The upgrade procedure is posted on the support forum.


 

Reviews

Average Rating:
(based on 1 review)

Showing 1 Review:

RatingReviewerReview
by whittemd
on 11/28/2017
Great Controller
Controller was easy to install and easy to configure. The instructions available here in the forum explain in good detail how this kit is put together, and by the way I was able to use the power supply that came with my K40 and use the PWM and TTL features. I would love to see a complete LaserCad manual in English, as I found that some features that are available in the software are not explained at all in the manual that is found here in the forum. I was disappointed that I could not use the software to position the Z axis and have to do that manually, However I do plan to install an auto-focus, as I understand that feature does work on this controller. Head movement is much smoother with this controller and it appears I am able to make more precise cuts and engravings.
Review and Rate this Item

Top Sellers