40Watt Desktop CO2 Laser Engraving machine (DSP)


Other products by : Lightobject
 Item# :   LSR-PRO530Z

  MSRP :   $3,450.00
  Price :   $2,999.00
 Quantity :  
 

Description  more details

Was $3,450 NOW $2,999 !!

 High Speed Desktop Laser Engraving/Cutting Machine developed by LightObject with the latest 4th generation DSP technology!

The PRO530 comes with the LO-E5 DSP controller that supports real time simulation and PPI. It is designed to be compact in size but powerful enough to cut through 1/3" plywood or 1/4" acrylic! Ideal for hobbyists, woodworkers or school projects and so much more!

The controller supports up to 200 art files by uploading from a USB memory stick or any other USB device which is very convenient because it saves time and the cost of a dedicated PC system for the machine.

The PRO530 comes with the powerful and user-friendly LightObject developed software - LaserCAD - which is capable of handling vector and raster graphics at the same time through different layers of setup. The PRO530 can engrave very fine lines and characters as well as cut through products of various depths!

A list of files supported: DXF, PLT, DST, DSB, BMP, GIF, JPG, PNG, MNG, ICO CUR, TIF, TGA, PCX, JBG, JP2, JPC, PGX, RAS, PNM, SKA, RAW. 


Power table 'Z' is included - a $195.00 value! Now you can control the Z table up/down (up to 1 1/2") to accommodate various material sizes.  You can also take out the honeycomb flat bed to give you up to another 5" of room/depth. The Power Z Table can hold up to 8 lbs.

 

Red dot laser pointer included. A $125 value! You can see where the laser is going to hit ahead of time. 


 


Shipping & Handling to US customers in 48 states ranges from $350 to $750 (depending on your location).  When you check out our shipping estimator will tell you the actual shipping cost to your location. 

Note: we accept bank transfer or money order only. Full payment is required prior to shipment.

Return/Refund Policy is HERE


Specifications:
CO2 Power: 40Watt 
Tube Trigger Volt: 22KV
Tube Operating Volt: 16KV
Operating voltage: AC 110V, 4A, 50/60Hz
Current: 18mA
Tube Length: 33.4" (850mm)
Working area: 19.6" x 11.8" (500mm x 300mm)
Precision: 0.01mm , resolution: 0.05mm
Speed: up to 47" second (1200mm/s) max
Wood cutting: up to 10mm/s on plywood with 6mm (1/4")
Water Protection sensor: Yes
DSP Controller: Comes with LO-E5 DSP controller for excellent motion and power control
OS: Windows Windows XP/Vista/7/8/10 (32 bit/ 64 bit)
Interface: USB port
USB memory drive support: Yes
PPI support: Yes
Mico step panning: Yes
Real time simulation: Yes
Cooling: Water Cool (not included, we recommend the LightObject 600w Chiller)
Support: BMP,GIF,PCX,TGA,PLT,CDR,DXF,AI
Application supported: CorelDRAW X4,X5,X6,X7,X8 AutoCAD 2004 or higher version
Machine dimension: 41" x 27.5" x 16.5" (1041mm x 700mm x 420mm)
Net Weight:  145lbs
Shipping weight: 198lbs


Reviews

Average Rating:
(based on 1 review)

Showing 1 Review:

RatingReviewerReview
by Bill
on 5/25/2017
Very Surprised
I have been using laser machines for well over 3 years and this is my third CO2 machine. Sold my large ULS laser in preparation for downsizing to a smaller retirement home and was looking for a more compact machine. I have dealt with LightObject before and when I saw they had a new one they had designed and built I knew it had to be good. The tube is a true 40 watt one which has a peak rating of 45 watts. IF this was sold on eBay it would be called incorrectly a 50 watt model by other venders. It was ordered and came by truck. I unpacked and hooked up to a vent system, water pump and air pump. Turned it on and Surprise it did a file that was already in the controller! Negatives, You will need to supply your own air and water pump and vent fan. I already had most of that anyway so it was not a big deal. It would have also been nice to have a focus tool, but they are easy to make. Would I recommend, absolutely. Well designed, quality, wired and built what more could you want?
Review and Rate this Item