LightObject 1600W CO2 Laser Machine Chiller/Cooler (AC220V)


Other products by : Lightobject
 Item# :   WC-LO1600WSH2V
21 units available
  MSRP :   $950.00
  Price :   $625.00
 Quantity :  
 

Description 

LightObject Water Chiller for CO2 Laser Machine (AC220V 60Hz) 

 

High efficiency and stability are the most important requirement for a water chiller. Without help from a microcontroller, it is an impossible task. The LO-1600W chiller comes with a sophisticated microcontroller feedback system to get fast a response. All setup tasks can be performed through a large LCD screen control panel. It is easy to read and no tedious programming tasks are needed.

 

The LO-1600W is ideal for use on a machine with a single 80W~180W tube or with dual 80W~130W tube*. It is a high performance water chiller with an excellence QC control. Very low defective rate, quality made, and better price than you can find on in the market!




Features:

  • Environment friendly freon R410A
  • Microcontroller control system with LCD touch panel
  • Compact design with 0.3'C temperature accuracy
  • Compressor delay circuit, over-current protection
  • Over-heat temperature alert, water flow protection



Specification

  • Cooling Power: 1600W
  • BTU: 5084Btu/h
  • Input power: AC 220V, 60Hz
  • Current: 3.6A
  • Compressor power: 0.93HP, 680Watt
  • Freon: R410A
  • Pump power: 30W
  • Lift (cut off) : 5m (16ft)
  • Rate: 10L/min, 158GPH
  • Inlet/Outlet size: 10mm
  • Ambient Temp.: ≤35'C (95'F)
  • Chilled Water Temp. 8~30'C
  • Weight: 30KG (65 lb)
  • Dimension: 550×280×430mm (21.6" x 11.0" x 17")

 

Due to the weight of this product it must be ordered individually and not combined with any other products.

 

 

* Need to add 2nd water pump

 

Reviews

Be the first to submit a review on this product!
Review and Rate this Item

Top Sellers

Heat sink for 25A SSR
EHS-SSR25A
Price: $4.25
Heat sink for 60A 90A SSR
EHS-SSR6090A
Price: $9.00
Heat sink for 40A SSR
EHS-SSR40A
Price: $6.50