1 Channel RF Remote Controller

click on thumbnail to zoom


Other products by : Lightobject
 Item# :   ERF-1A433C
161 units available
  Price :   $12.00
 Quantity :  
 

Description 

This is the latest model of 1Ch RF controller supports 1527 and 2262 chip set. Plus, it works for multi-channel remote and it can be programmed per channel. Size is about 1/2 of the original 1A. It comes with a plastic case.

Key Features of the 1A RF Controller (remote may be in different style)

  • Respond to 1527 & 2262 transmitter
  • Work as individual for 2ch,4ch,6ch,8ch,12ch
  • Three modes: Toggle, Momentary,Latched
  • Encode/Decode to avoid interference
  • Relay Output

 

Specification

  • Distance: 30-50M(100ft-164ft)
  • Power supply: 12V
  • Encode/Decode: Yes(Learning Code)
  • Control Type: Quad mode:( Momentary, Toggle)
  • Relay handling: 10A/125VAC, 10A/30V DC
  • Receiver Board Size: 8cm x 10cm x 3cm Remote
  • Size: 1 3/4" x 1 1/4" x 5/8" (5cm x 3.2cm x 2cm)

Modes:

  • Toggle: Press=On, Press again=Off
  • Momentary: Press=On, Release=Off
  • Latched: Press=On, Release=On (locked)

Jumper setting:
1&2 Closed, 3 open Toggle
2&3 Closed: 1 open Latch
1,2,3 all open: Momentary
Model M1A
Description 1Channel RF Controller
Channel 1
Chipset 1527 & 2262
Frequency 433MHz
Range 100M~150M

Reviews

Average Rating:
(based on 3 reviews)

Showing 3 Reviews:

RatingReviewerReview
by Donny
on 12/1/2014
Works well.
Works just as it should. I was hoping to utilize it with a wireless PIR motion sensor but have found the PIR has a different chipset (2516 instead of 1527 or 2262) so it won't work with this particular PIR. I did test it's functionality (relay) and it works perfect.
by jack
on 11/4/2011
noisey
works great except for a load whine when transmitter is on.sounds line a high pitched carrier.
by Tom
on 5/11/2009
Inventor
So far it works great but the range isn't as long as they say. The instructions could be interpreted better, by someone that knows English a little better.
Review and Rate this Item