Power table for K40 laser machine

click on thumbnail to zoom

Other products by : Lightobject
 Item# :   LSR-PWRTB320
90 units available
  MSRP :   $250.00
  Price :   $195.00
 Quantity :  


This is a mini-powered bed designed for the "K40" also named "D40K", small desktop CO2 laser machine. With this Power Z Table it turns the K40/D40K easily handles object of different thickness. The traveling distance is 70mm (2.7 inches). By having this power bed, you save a tremendous time of doing height adjustments or focusing point adjustment. Without a good focal point, you won't be able to get detailed engraving. Plus, cutting power drops greatly if out of focus. The power bed is great for other projects as well when lifting feature is needed.

The unit comes as a kit. It should take less than 90 min to set it up. It's fun to build it!


No formal manual inclued. We may provide pictures to show each step of DIY


- Table Size:13 3/4 x 9 1/16 x 4 5/32 or  350mm x 230mm x 106mm
- Workable area: 300mm x 200mm
- Lift speed: 10mm/s
- Lift weight: 3.5kg (8.0lb) at 3200 (1/16)
- Motor: 42HS03 2A 2 phase 4 wires
- Frame: aluminum
- Bed: metal and plated in silver


Items needed to control the z table manually(without a DSP controller):

 Mini 2 Phase 2A 1-axis Stepping Motor Driver (sell separately).

 DC 24V 5A Switching Power Supply. Good for CNC stepping motor and water pump (sell separately)

 Stepping motor controller board & tester (sell separately)

 2x Green SPDT Push Button (Momentary) Switch w/ light (sell separately)


Motor connection: A+/A- Red/Yellow,  B+/B- Orange/Brown


*Note: The K40 stock main board will not be able to drive this table. Don't use it in direct replacement for Y or it will damage the main board. Need an external motor driver instead.


Average Rating:
(based on 11 reviews)

Showing 1 - 5 of 11 Reviews:

by David Montgomery
on 5/26/2017
Excellent Value & Service By Light Object Team
I had the Z axis table together in 20 minutes. Packaging missing a couple parts, but Light Object was prompt in shipping out replacement parts. Well designed and construction. I also ordered a secondary power supply and a rotary suitable for the K40. Pleased with EVERY purchase I've made from Light Object.
by Phil
on 11/24/2016
Reasonable price, great addition to a small machine
Really easy to put together. I used a machinist square to get the top and bottom sections aligned. Took 30 minutes or less to assemble. The only issue I have with it is the threaded rods are just a tiny bit shorter than the aluminum frame rods. This causes a little bit of play (few hundredths of an inch) in the table. If you just press it flat before using, I don't see it ever being a problem. I polished the aluminum rods for a smoother appearance. I have it hooked to a Gecko G201X stepper motor driver. I will probably add two limit switches and definitely bond a steel ruler to the top for ease of use. Overall, the price is very reasonable and I really like the table. Before putting the top blue piece on, thread the rods through the brass nuts just a few turns and place a flat bar on top of the nut. Rotate the shaft until it touches the top. Do this for all four. Your table will be perfectly aligned. Don't put to much tension on belt. You'll wear it out or the motor will stall.
by Robert Rossi
on 11/18/2016
Great Table for the K40
Great Table for the K40 / China laser cutter. I thought the ZTable was high quality. All the parts are nicely machined. You cannot beat this price...Its a great little table. There are no instructions included with the table...so look at the picture. It still went together easily. I'm using it with my smoothie board upgrade. It works great. When you get the table the top blue frame comes pre-assembled...after you get the table together...Loosen the bolts holding the top frame together and ensure all the drive shafts are plumb. The belt drive should turn freely. The table was locking up until I loosed the top bots and re-seated it.... It really works great....For 195.00 you can't go wrong with this table.....Good Job LightObject! :-)
by Thomas
on 4/9/2016
A must have for K40 laser owner
I bought one a couple of month ago, it's a must have for K40 laser owner, the power-table look nice and professional and also work great, I'm using-it every time to adjust the focus. I wrote an article to help people for the assembly, it's very easy and pleasant to do: http://www.tom-aes.com/?p=26 Congratulation to lightobject for this nice product ! Thank you for your comment and effort!
by Don
on 11/15/2015
Needed addition
The table looks great, untill I start cutting on it :) It had no instructions, It would take 1 hour to produce instructions and that would be a value-added feature. Also it does reduce the usable area of this already small laser by about 1 inch width and 3/4 length but will allow for thicker material or different focal length lenses. I will be mdifying it with limit switches and bonding a stainless ruler to the x and y rails for easier material placement.
Review and Rate this Item

Top Sellers