LO12900ZR CO2 laser engraving/ cutting machine
The LO 12900ZR is a professional grade engraving/cutting machine with the latest 4th generation DSP technology - the LO X7 DSP Controller with Color Display! The LO X7 supports real time simulation and PPI. The LO X7 Controller supports up to 200 art files by uploading from a USB memory stick or any other USB device which is very convenient because it saves time and the cost of a dedicated PC system for the machine.
An air cooling system is installed inside of the LO 12900ZR to improve performance. The laser head is installed on a roller wheel so higher speed can be achieved.
The LO 12900ZR comes with the powerful yet user-friendly software - RayCam v1.2 - that enables the user to work right after the machine is set up. If you need to handle more complicated, detailed art work our software is capable of integrating CorelDRAW, AutoCAD, Inkscape and more. With these features the LO 12900ZR will engrave/etch whatever you can dream up and the 100 Watt Laser Tube is powerful enough to cut through 1” plywood! What you see on the screen is what you will get from your project!
The software is capable of handling vector and raster graphics at the same time through different layers of setup. A list of files supported: DXF, PLT, DST, DSB, BMP, GIF, JPG, PNG, MNG, ICO CUR, TIF, TGA, PCX, JBG, JP2, JPC, PGX, RAS, PNM, SKA, RAW.
Optional High Precision Rotary (model ECNC-RTY9001) is available to make it capable of engraving round objects like wine bottles, wood trim, cups, etc.. Almost any round shaped object is possible! The High Precision Rotary (ECNC-RTY9001) is $425.
Shipping & Handling to US customers in 48 states ranges from $850 to $1200 (depending on your location). When you check out our shipping estimator will tell you the actual shipping cost to your location.
Note: we accept bank transfer or money order only. Full payment is required prior to shipment.
Return/Refund Policy is HERE
Specifications: CO2 Power: 100Watt Tube Trigger Volt: 28KV Tube Operating Volt: 22KV Operating voltage: AC110V, Optional AC 200~220V, 5A, 50/60Hz Current: 26-28 mA Length: 1400mm Working area: 1200mm x 900mm (46" x 35.5") with +/- 2mm
Passthrough size:(front/back): 50"(51"x1.25")
Power Z table: Yes (200mm)
Beam combiner built in (red dot laser pointer):Yes
Power Z table: Yes (200mm) Precision: 0.01mm , resolution: 0.05mm Speed: 750mm/s for X , 500mm/s for Y during engraving, Engraving deep: 5~8mm. Multiple pass is ok Wood cutting: up to 25mm (1"), 12mm acrylic. Water Protection: Yes DSP Controller: Comes with a LCD unit for motion control and power control OS: Windows 2000/XP/Vista/7/8/10 (32 bit/64 bit) Interface: USB port or Ethernet (RJ45) USB memory drive support: Yes PPI support: Yes Micro step panning: Yes Real time simulation: YesCooling: Water Cooler (not included - we recommend the LightObject Brand of Chillers) Supports: BMP,GIF,PCX,TGA,PLT,CDR,DXF,AI Application supported:CorelDRAW X4,X5,X6,X7,X8 AutoCAD 2004 or higher version, Inscape and more! Size: 1753mm*1442mm*1092mm (69" x 56" x 43") Weight:340Kg/750lb (shipping 408kg/900lb) Warranty: 1 years on machine, 6 months on laser tube and all optics
Copyright 2017 Annex Depot Inc.,
CA tax apply to California resident only. All rights reserved.