LO181200R 130W CO2 laser engraving/ cutting machine
The LO 181200W6 is a professional grade 100 Watt (upgradeable to 130 or 150 Watt) engraving/cutting machine with the latest 4th generation DSP technology - the LO X7 DSP Controller with Color Display! The LO X7 supports real time simulation and PPI. The LO X7 Controller supports up to 200 art files by uploading from a USB memory stick or any other USB device which is very convenient because it saves time and the cost of a dedicated PC system for the machine.
An air cooling system is installed inside of the LO 181200W6 to improve performance. The laser head is installed on a roller wheel so higher speed can be achieved.
The LO 181200W6 comes with the powerful yet user-friendly software - RayCam v1.2 - that enables the user to work right after the machine is set up. If you need to handle more complicated, detailed art work our software is capable of integrating CorelDRAW, AutoCAD, Inkscape and more. With these features the LO 181200W6 will engrave/etch whatever you can dream up and the 130 Watt Laser Tube is powerful enough to cut through 1” plywood! What you see on the screen is what you will get from your project!
The software is capable of handling vector and raster graphics at the same time through different layers of setup. A list of files supported: DXF, PLT, DST, DSB, BMP, GIF, JPG, PNG, MNG, ICO CUR, TIF, TGA, PCX, JBG, JP2, JPC, PGX, RAS, PNM, SKA, RAW.
Shipping & Handling to US customers in 48 states ranges from $950 to $1300 (depending on your location). When you check out our shipping estimator will tell you the actual shipping cost to your location.
Note: we accept bank transfer or money order only. Full payment is required prior to shipment.
Return/Refund Policy is HERE
Laser Power: Customers choice of 100W ($9,500),130W ($10,000), or 150W ($10,500)
Trigger Volt: 28~30KV
Tube Operating Volt: 24KV
Operating voltage: AC110V, Optional AC 200~220V, 5A, 50/60Hz
Working area: 1800mm x 1200mm (70.8" x47.2")
Power Z table: Not supported
Beam combiner built in (red dot laser):Yes
Precision: 0.01mm , resolution: 0.05mm
Speed: 600mm/s for X , 400mm/s for Y during engraving
Engraving deep:4mm for wood or 2mm for acrylic plastic. Multiple pass is ok
Wood cutting: up to 1" (27mm), 1" (27mm) acrylic with 68.5mm or 75mm focus lens/100 Watt Tube
Water Protection: Yes (not included - we recommend the LightObject Brand of Chillers)
DSP Controller: Comes with a LCD unit for motion control and power control
OS: Windows 2000/XP/Vista/7/8/10 (32 bit/64 bit)
Interface: USB port
USB memory drive support: Yes
PPI support: Yes
Micro step panning: Yes
Real time simulation: Yes
Cooling: Water Cooler (not included - we recommend the LightObject Brand of Chillers)
Files Supported: BMP,JPG,GIF,PCX,TGA,PLT,CDR,DXF,AI
Application supported: CorelDRAW X4,X5,X6,X7,X8 AutoCAD 2004 or higher version, Inscape and more!
Machine size: 93.7" x 68" x 44" (2380mm x 1727mm x 1100mm)
Warranty: 1 year on machine, 6months on laser tube and all optics
Copyright 2017 Annex Depot Inc.,
CA tax apply to California resident only. All rights reserved.