LO640 BlueJ laser engraving/ cutting machine 600mmx400mm

Other products by : Lightobject
 Item# :   LSR_LO640BJ

  MSRP :   $7,250.00
  Price :   $6,200.00
 Quantity :  

Description  more details

The LO640BJ is a professional grade engraving/cutting machine with the latest 4th generation DSP technology - the LO X7 DSP Controller with Color Display!  The LO X7 supports real time simulation and PPI. The LO X7 Controller supports up to 200 art files by uploading from a USB memory stick or any other USB device which is very convenient because it saves time and the cost of a dedicated PC system for the machine.

An air cooling system is installed inside of the LO640BJ to improve performance. The laser head is installed on a roller wheel so higher speed can be achieved.  

The LO640BJ comes with the powerful yet user-friendly software - RayCam v1.2 - that enables the user to work right after the machine is set up. If you need to handle more complicated, detailed art work our software is capable of integrating CorelDRAW, AutoCAD, Inkscape and more. With these features the LO640BJ will engrave/etch whatever you can dream up and the 60 (upgradeable to 80 watt!) Watt Laser Tube is powerful enough to cut through 1/2” plywood!  What you see on the screen is what you will get from your project!

The software is capable of handling vector and raster graphics at the same time through different layers of setup. A list of files supported: DXF, PLT, DST, DSB, BMP, GIF, JPG, PNG, MNG, ICO CUR, TIF, TGA, PCX, JBG, JP2, JPC, PGX, RAS, PNM, SKA, RAW.

A quality made honeycomb flat bed allows for better heat release from the object


Shipping & Handling to US customers in 48 states ranges from $350 to $750 (depending on your location). When you check out our shipping estimator will tell you the actual shipping cost to your location.

Note: we accept bank transfer or money order only. Full payment is required prior to shipment.

Return/Refund Policy is HERE

CO2 Power: 60Watt by default, upgradeable to 80W
Tube Trigger Volt: 26KV
Tube Operating Volt: 18KV
Operating voltage: AC110V, Optional AC 200~220V, 5A, 50/60Hz
Current: 22mA
Length: 1200mm
Working area: 600mm x 400mm
Power Z table: N/A
Precision: 0.01mm , resolution: 0.05mm
Speed: 750mm/s for X , 400mm/s for Y during engraving,
Engraving deep:1mm for wood or o.5mm for acrylic/plastic. Multiple pass is ok
Wood cutting: up to 16mm (1/2")
Water Protection: Yes(not included - we recommend the LightObject Brand of Chillers)
DSP Controller: Comes with a LCD unit for motion control and power control
OS: Windows 2000/XP/Vista/7/8/10 (32 bit/ 64 bit)
Interface: USB port  or Ethenet
USB memory drive support: Yes
PPI support: Yes
Micro step panning: Yes
Real time simulation: Yes
Cooling: Water Cooler(not included - we recommend the LightObject Brand of Chillers)
Application supported:CorelDRAW X4,X5,X6,X7,X8 AutoCAD 2004 or higher version, Inscape and more!
Weight:180Kg/400lb (shipping 220kg/500lb)


Be the first to submit a review on this product!
Review and Rate this Item