LO960ZR CO2 laser engraving/ cutting machine with 100W
The LO 960ZR100W is a professional grade engraving/cutting machine with the latest 4th generation DSP technology - the LO X7 DSP Controller with Color Display! The LO X7 supports real time simulation and PPI. The LO X7 Controller supports up to 200 art files by uploading from a USB memory stick or any other USB device which is very convenient because it saves time and the cost of a dedicated PC system for the machine.
An air cooling system is installed inside of the LO 960ZR100W to improve performance. The laser head is installed on a roller wheel so higher speed can be achieved.
The LO 960ZR100W comes with the powerful yet user-friendly software - RayCam v1.2 - that enables the user to work right after the machine is set up. If you need to handle more complicated, detailed art work our software is capable of integrating CorelDRAW, AutoCAD, Inkscape and more. With these features the LO 960ZR100W will engrave/etch whatever you can dream up and the 100 Watt Laser Tube is powerful enough to cut through 7/8” plywood! What you see on the screen is what you will get from your project!
The software is capable of handling vector and raster graphics at the same time through different layers of setup. A list of files supported: DXF, PLT, DST, DSB, BMP, GIF, JPG, PNG, MNG, ICO CUR, TIF, TGA, PCX, JBG, JP2, JPC, PGX, RAS, PNM, SKA, RAW.
The LO 960ZR100W comes with a "Power Z Table"! Now you can control the Z table up/down to accommodate various material sizes -up to 150 pounds! You can also take out the honeycomb flat bed to give you up to another 6" of room/depth.
Optional High Precision Rotary (model ECNC-RTY9001) is available to make it capable of engraving round objects like wine bottles, wood trim, cups, etc.. Almost any round shaped object is possible! The High Precision Rotary (ECNC-RTY9001) is $425.
Shipping & Handling to US customers in 48 states ranges from $450 to $1000 (depending on your location). When you check out our shipping estimator will tell you the actual shipping cost to your location.
Note: we accept bank transfer or money order only. Full payment is required prior to shipment.
Return/Refund Policy is HERE
CO2 Power: 100Watt Standard laser tube
Trigger Volt: 25KV
Operating Volt: 20KV
Operating voltage: AC110V, Optional AC 200~220V, 5A, 50/60Hz
Tube Length: 1400mm
Working area: 900mm x 600mm (35.4" x 23.6")
Passthrough size:(front/back): 38"(39"x1.25")
Power Z table: Yes (200mm)
Beam combiner built in (red dot laser pointer):Yes
Precision: 0.01mm ,
Speed: 750mm/s for X , 500mm/s for Y during engraving,
Engraving deep:3~5mm, multiple pass is possible
Multiple pass is ok
Wood cutting: up to 21mm (7/8")
Water Protection: Yes
DSP Controller: Comes with a LCD unit for motion control and power control
OS: Windows 2000/XP/Vista/7/8/10 (32 bit/64 bit)
Interface: USB port or Ethenet (RJ45)
USB memory drive support: Yes
PPI support: Yes
Micro step panning: Yes
Real time simulation: Yes
Cooling: Water (not included - we recommend the LightObject Brand of Chillers)
Formats Supported: BMP,GIF,PCX,TGA,PLT,CDR,DXF,AI
Application supported: CorelDRAW X4,X5,X6,X7,X8 AutoCAD 2004 or higher version, Inscape and more!
Machine Dimension: 1473mm*1118mm*1143mm (58" x 44" x 45")
Shipping Dimension: 1550mm*1168mm*1296mm (61" x 46" x 51")
Weight:310Kg/680lb (shipping 350Kg/770lb)
Copyright 2017 Annex Depot Inc.,
CA tax apply to California resident only. All rights reserved.