40Watt Professional CO2 Laser Engraving and Cutting Machine (DSP)
This is a Professional grade engraving/cutting machine with the latest 4th generation DSP technology - the LO X7 DSP Controller with Color Display. The LO X7 supports real time simulation and PPI.
An air cooling system is installed inside of the machine to improve the performance. The laser head is installed on a roller wheel so higher speed can be achieved. The controller supports up to 200 art files by uploading from a USB memory stick or any other USB device which is very convenient because it saves time and the cost of a PC system. The machine comes with user-friendly software that enables the user to work right after the machine is set up. If you need to handle more complicated, detailed art work the software is capable of integrating CorelDraw X4 or X5 & AutoCad. With these features, it provides you an excellent environment of "What you draw is what you will get!" The software is capable of handling vector and raster graphics at the same time through different layers of setup. The machine can engrave very fine lines and characters. Also, it can do cutting as well. A list of files supported: DXF, PLT, DST, DSB, BMP, GIF, JPG, PNG, MNG, ICO CUR, TIF, TGA, PCX, JBG, JP2, JPC, PGX, RAS, PNM, SKA, RAW. Power table 'Z' is included! Now you can control the Z table up/down to accommodate various material sizes. You can also take out the honeycomb flat bed to give you up to another 6" of room/depth. . Optional High Precision Rotary (model ECNC-RTY9001) is available to make it capable of engraving round objects like wine bottles, wood trim , cups, etc.. Almost any round shaped object is possible! The High Precision Rotary (ECNC-RTY9001) costs an additional $425. Shipping & Handling to US customers in 48 states range from $350 to $750 depending on your location. Note: we accept bank transfer or money order only. Full payment is required prior to delivery. 20% restocking fee required if returned for refund. S/H is non-refundable. Buyer pays for return shipping cost. Specification: CO2 Power: 40Watt (45W peak) Tube Trigger Volt: 22KV Tube Operating Volt: 16KV Operating voltage:AC110V, Optional AC 200~220V, 5A, 50/60Hz Current: 18mA Length: 39.3" (1000mm) Working area: 600mm x 400mm (23.6" x 15.7") Precision: 0.01mm , resolution: 0.05mm Speed: 800mm/s for engraving, 4~5mm/s for proxy glass cutting (up to 6mm) Engraving deep:2~3mm Wood cutting: up to 19mm (3/4") Water Protection: Yes DSP Controller: Comes with a LCD unit for motion control and power control OS: Windows 2000/ XP/ Win7/8/10 (32 bit/ 64 bit) Interface: USB port USB memory drive support: Yes PPI support: Yes Mico step panning: Yes Real time simulation: Yes Cooling: Water Cooler Support: BMP,GIF,PCX,TGA,PLT,CDR,DXF,AI Application supported: CorelDraw V11, V12, V14,X5, AutoCAD 2004 or higher version Size: 1165mm x 860mm x 560mm (46" x 34" x 22") Weight:189Kg/415lb (shipping 220kg/480lb)
Copyright 2014 Annex Depot Inc.,
CA tax apply to California resident only. All rights reserved.