Professional 80W CO2 Laser Engraving cutting machine with power Z table
The PRO 6040D80 is a professional grade engraving/cutting machine with the latest 4th generation DSP technology - the LO X7 DSP Controller with Color Display! The LO X7 supports real time simulation and PPI. The LO X7 Controller supports up to 200 art files by uploading from a USB memory stick or any other USB device which is very convenient because it saves time and the cost of a dedicated PC system for the machine.
An air cooling system is installed inside of the PRO 6040D80 to improve performance. The laser head is installed on a roller wheel so higher speed can be achieved.
The PRO 6040D80 comes with the powerful yet user-friendly software - RayCam v1.2 - that enables the user to work right after the machine is set up. If you need to handle more complicated, detailed art work our software is capable of integrating CorelDRAW, AutoCAD, Inkscape and more. With these features the PRO 6040D80 will engrave/etch whatever you can dream up and the 80 Watt Laser Tube is powerful enough to cut through 1/2” plywood! What you see on the screen is what you will get from your project!
The software is capable of handling vector and raster graphics at the same time through different layers of setup. A list of files supported: DXF, PLT, DST, DSB, BMP, GIF, JPG, PNG, MNG, ICO CUR, TIF, TGA, PCX, JBG, JP2, JPC, PGX, RAS, PNM, SKA, RAW.
The PRO 6040D80 comes with a "Power Z Table"! Now you can control the Z table up/down to accommodate various material sizes. You can also take out the honeycomb flat bed to give you up to another 6" of room/depth.
Optional High Precision Rotary (model ECNC-RTY9001) is available to make it capable of engraving round objects like wine bottles, wood trim, cups, etc.. Almost any round shaped object is possible! The High Precision Rotary (ECNC-RTY9001) is $425.
Shipping & Handling to US customers in 48 states ranges from $350 to $800 (depending on your location). When you check out our shipping estimator will tell you the actual shipping cost to your location.
Note: we accept bank transfer or money order only. Full payment is required prior to shipment.
Return/Refund Policy is HERE
Specifications: CO2 Power: 80Watt Tube Trigger Volt: 26KV Tube Operating Volt: 20KV Operating voltage: AC110V, Optional AC 200~220V, 5A, 50/60Hz Current: 26~28mA Length: 1400mm Working area: 600mm x 400mm +/- 25mm Precision: 0.01mm , resolution: 0.05mm Speed: 800mm/s for engraving, 5~8mm/s for proxy glass cutting (up to 8m) Engraving deep:1mm for wood or o.5mm for acrylic plastic Wood cutting: up to 16mm (1/2") Water Protection: Yes DSP Controller: Comes with a LCD unit for motion control and power control OS: Windows 2000/XP/Vista/7/8/10 (32 bit/ 64 bit) Interface: USB port USB memory drive support: Yes PPI support: Yes Micro step panning: Yes Real time simulation: YesCooling: Water Cooler (not included - we recommend the LightObject Brand of Chillers) Support: BMP,GIF,PCX,TGA,PLT,CDR,DXF,AI Application supported:CorelDRAW X4,X5,X6,X7,X8 AutoCAD 2004 or higher version, Inscape and more! Size: 1165mm*860mm*560mm (46" x 34" x 22") Weight:189Kg/415lb (shipping 220kg/480lb)
DSP Controller with a LCD control panel
Copyright 2017 Annex Depot Inc.,
CA tax apply to California resident only. All rights reserved.