X7 DSP upgrade kit for K40/D40


Other products by : Lightobject
 Item# :   LSR-X7K40DSPKIT

  Price :   $500.50
X7 DSP upgrade kit for K40 small laser machine
  • X7 DSP Controller card for CO2 Laser Engraving/ Cutter with color screen - ($350.00)
  • DC 24V 5A Switching Power Supply. Good for CNC stepping motor and water pump - ($30.00)
  • 18mm Laser Head w/Air Assist. Ideal for K40 Machine - ($19.50)
  • Mini 2 Phase 1.5A 1-Axis Stepping Motor Driver - ($58.00)
  • Emergency Push Button Switch with lock - ($9.00)
  • 3 Digit Mini Blue LED DC 100mA Meter. Ideal for CO2 Laser Power Indicator (100mA) - ($11.00)
  • 3 Wire Limit Switch/Sensor Cable - ($3.50)
  • 2 Wire Limit Switch/Sensor Cable - ($3.50)
  • Proximity Limit Sensor Switch (C2) - ($2.00)
  • Single Micro Limit Sensor Switch B1 - ($1.00)
  • 2405S DC-DC 5V (2Watt) Isolated Power Module. Ideal for 24V system - ($8.50)
  • 5X8 Silicon Flex Tube for Air Assistance or Water Cooling - ($4.50)
 Quantity :  
 

Description 

sThis is a complete upgrade kit for the small laser machine K40 Co2,also named D40. It can also apply to other small laser machines of similar specifications.  After the upgrade is completed, the K40 will become a great machine capable of producomg detailed images from engraving. Plus, you can do precise cutting on the same or separate layer.

 

Items included:

 

  • X7 DSP Controller card for CO2 Laser Engraving/ Cutter with color screen
  • DC 24V 5A Switching Power Supply. Good for CNC stepping motor and water pump
  • 18mm Laser head w/ air assisted. Ideal for K40 machine
  • Two(2) Mini 2 Phase 1.5A 1-axis Stepping Motor Driver
  • Emergency Push Button Switch with lock
  • 3 digit Mini Blue LED DC 100mA meter. Ideal for CO2 Laser power indicator(100mA)
  • 3 wires Limit switch/ sensor cable
  • 2 wires Limit switch/ sensor cable
  • Proximity Limit Sensor Switch (C2)
  • Single Micro Limit Sensor Switch B1
  • 2405S DC-DC 5V (2Watt) Isolated Power Module. Ideal for 24V system
  • 5X8 Silicon Flex Tube for Air Assistance or Water Cooling

 

 

The upgrade procedure is posted on the support forum.

Reviews

Average Rating:
(based on 3 reviews)

Showing 3 Reviews:

RatingReviewerReview
by Michael
on 5/2/2016
Best choice you can make as a K40 owner
I purchased the kit after running my engraver for about 6 months and it seems like I wasn't even using it before. The upgrade process went extremely easily thanks to the wiring diagram (make sure to sign up for the forum in order to find it). Even re-alining the mirrors went without a hitch.
by John
on 12/1/2015
Only one regret
The X7 controller is an excellent upgrade that I would recommend to anyone with a k40. The controller and a table combo gave me a brand new machine that I have complete control over. The circular interpolation actually creates a circle instead of an egg that the stock controller would make. The burns are consistently smooth. As the previous reviewer mentioned, it's not a plug n play type conversion, but not too difficult either. It took me about 30 hours to get the upgrade completed. My motion control experience prior to this build was zero; but with the help of the LO forum and googling issues I ran across, I got it working above my expectations. My only regret is that I struggled with the stock controller for too long before I upgraded to the X7.
by Chris
on 6/10/2015
Very nice upgrade
After installing this kit, my K40 laser cutter is leaps and bounds better than it was before. The upgrade is time consuming, but it wasn't difficult. I spent about 4-5 days gutting the machine, cutting and routing cables, and installing the hardware. I opted to replace pretty much everything, including the laser power supply and optics. The end result is a really great, accurate, and stable machine, though.
Review and Rate this Item

Top Sellers