9L/min Small Straight through DC Brushless Water Pump. *** We can customize pump for your application ***

click on thumbnail to zoom
Other products by Lightobject
Item #: EWP-381312V
Reg. Price: $45.00
Our Price: $16.50
Quantity:
 
179 units available

Description 

This is a specail straight-through DC submersible water pump with moderate pressure output. It can be used submersible or it can run dry as long as water is flowing. It's built by a brushless motor so that it's quieter and last longer than a non-brushless water pump. Plus,it will not generate any 'electric spark' (noise) like a brush type motor does.


Specification

Power: DC12V
Output: 9L/m (142GPH) @12V
Vertical cut off: 3.6m (11.5ft)
Pressure: 5psi
Current: [email protected]
Intake: 14mm/20.5mm Dia.
Outlet: 14mm/20.5mm Dia.
Self-Prime: No
Life span: > 20,000hrs @ 1600rpm~10,000rpm
Noise: << 35dB
Fluid temp: 65'C (not submersed)
Envir Temp: <40'C
Size(L*W*D): 4.64"x 2.0"x 2.0" (116mm X 50mm X 50mm)
Weight (net): 9.0oz


Warning:
Do not let it run dry without water flowing. To those who want to use it with a solar power battery, please make sure to install a 12V regulator as the output from a solar panel higher than 12V (as high as 22V) . Warranty will not cover the damage!

How to use:
-Submerse or Inline
-With Solar panel

Reviews

Average Rating:
(based on 1 review)

Showing 1 Review:

RatingReviewerReview
by Frank
on 1/23/2018
Great value
I've used a few of these little pumps and like them. They seem reliable, don't use much power and are compact, easy to install. My only gripe is that they sometimes leak - the o-ring on the end opposite the impeller either falls out (I just had one where it was broken in half and laying inside the pump). I remove the o-ring and seal the joint with some 3M 5200 (water resistant sealant). Of course you'll never get it apart after that, but who cares?
Review and Rate this Item