LightObject Water Chiller for CO2 Laser Machine (AC110V 60Hz)
High efficiency and stabiliy are the most important requirement for a water chiiler. Without help from a microcontroller, it is an impossible task. The LO-1600W comes with a sophisticated microcontroller feedback system to get a fast response. All setup tasts can be performed through a large LCD screen control panel. It is easy to read and no tedious programming tasks needed.
The LO-1600W is ideal for use on a machine with a single 80W~180W tube or with dual 80W~130W tube*. It is a high performance water chiller with an excellence QC control. Low defective rate, quality made, and better price that you can hardly find one in the market.
- Environment friendly freon R410A
- Microcontroller Control System with LCD touch panel
- Compact design with 0.3'C temperature accuracy
- Compressor delay circuit, over-current protection
- Over-heat temperature alert, water flow protection
- Cooling Power: 1600W
- BTU: 5084Btu/h
- Input power: AC 110V, 60Hz
- Current: 7.5A
- Compressor power: 0.93HP, 680Watt
- Freon: R410A
- Pump power: 30W
- Lift (cut off) : 5m (16ft)
- Rate: 10L/min, 158GPH
- Inlet/Outlet size: 10mm
- Ambient Temp: ≤35'C (95'F)
- Chilled Water Temp. 18~30'C(64.4~86'F)
- Water tank capacity: 1 gallon
- Weight: 30KG (65lb)
- Dimensions: 550×280×430mm (21.6" x 11.0" x 17")
Due to the weight of this product it must be ordered individually and not combined with any other products.
1600W water chiller manual can be downloaded from here.