Lightobject 1600W Water Chiller for CO2 Laser Machine (AC220V 60Hz)

Retail Price: $695.00
Price: $545.00
The product is currently out of stock, current quantity is 0

LightObject Water Chiller for CO2 Laser Machine (AC220V 60Hz) 


High efficiency and stability are the most important requirement for a water chiller. Without help from a microcontroller, it is an impossible task. The LO-1600W chiller comes with a sophisticated microcontroller feedback system to get fast a response. All setup tasks can be performed through a large LCD screen control panel. It is easy to read and no tedious programming tasks are needed.


The LO-1600W is ideal for use on a machine with a single 80W~180W tube or with dual 80W~130W tube*. It is a high performance water chiller with an excellence QC control. Very low defective rate, quality made, and better price than you can find on in the market!


  • Environment friendly freon R410A
  • Microcontroller control system with LCD touch panel
  • Compact design with 0.3'C temperature accuracy
  • Compressor delay circuit, over-current protection
  • Over-heat temperature alert, water flow protection


  • Cooling Power: 1600W
  • BTU: 5084Btu/h
  • Input power: AC 220V, 60Hz
  • Current: 3.6A
  • Compressor power: 0.93HP, 680Watt
  • Freon: R410A
  • Pump power: 30W
  • Lift (cut off) : 5m (16ft)
  • Rate: 10L/min, 158GPH
  • Inlet/Outlet size: 10mm
  • Ambient Temp.: ≤35'C (95'F)
  • Chilled Water Temp. 8~30'C
  • Weight: 30KG (65 lb)
  • Dimension: 550×280×430mm (21.6" x 11.0" x 17")


Due to the weight of this product it must be ordered individually and not combined with any other products.


Average rating 10 out of 10 ( based on 1 review )

LO 1600 chiller easy to set up temperature range

Review by Mucio Camarena on 12/17/2018

It is the second chiller of this model that I am purchasing, I can see that this brand of chiller is easier to set up the temperature range, the first one that I purchased was about 4 years ago and it is working fine.

Write a Review