All the components needed to build your own PR530! PLUS you get the options to include a 35W, 40W, 45W or 60W Tube AND you get the option to choose our LO-E5 Controller or our Color LO-X7 controller! You can even choose to add on your own Power Z table (with additional power supply/motor). YOU choose all the bells and whistles and SAVE!
Customize it to fit your needs and budget!
1x High Speed PR530 500*300 XY Stage DIY Laser Kit
1x 135W Air compressor/ pump for CO2 laser AC110V
3x 19mm High Quality Si Plated Reflection Mirror
1x High quality 15.0mm ZnSe Focus lens (F50.8mm)
1x DC 24V 15A Switching Power Supply. Good for CNC Stepping Motor Drive
1x AC electricity EMI filter 20A
20ft 8X12 Silicon Flex Tube for CO2 Water Cooling
1x Emergency Push Button Switch with lock
1x Small DC 30mA Analog Panel Meter
2x Magnetic limit switch
15ft 3 Wire Limit Switch/Sensor Cable
15ft 2 Wire Limit Switch/Sensor Cable
10ft 5X8 Silicon Flex Tube for Air Assistance or Water Cooling
1x 10mm to 8mm Easy Snap Pneumatics air tubing straight coupler
2x Leadshine mini 2 Phase DM422 2.2A 1-axis Stepping Motor Driver
Pay phone support service is available here.
The upgrade procedure is posted on the support forum.
E5 controller manual and diagram can be downloaded from here.
X7 controller manual and diagram can be downloaded from here.
600W water chiller manual can be downloaded from here.