2Ch RF Remote Control 1527 Tx/Rx Kit (metal case)

(1)
Price: $14.50
  • SKUERF-2A433-MT
53 units available
- +

Key Features of the 2A 2 channel RF Controller with metal remote

  • Metal remote with sliding cover case
  • Three modes: Toggle, Momentary,Latched
  • 1527 IC auto encode/decode
  • Individual relay Output

 

Specification

  • Distance: 30-50M(96-164 feet)
  • Power supply: 12V
  • Encode/Decode: Yes(Learning Code)
  • Control Type: 3 modes:( Momentary, Toggle, Latch)
  • Relay: 10A/125VAC, 8A/14V DC
  • Receiver Board Size: 8cm x 10cm x 3cm Remote
  • Size: 5.5cm x 7.5cm x 3cm

Modes:

  • Toggle: Press=On, Press again=Off
  • Momentary: Press=On, Release=Off
  • Latched: Press=On, Release=On (locked)

 

Jumper J1 and J2 setting:

  • Put cap on J1 for Latch mode
  • Put cap on J2 for Toggle mode
  • Put cap on J1 and J2 or leave all open for Momentary mode

 

Relay Pinout

  • A = Normally Closed
  • B = Common Ground
  • C = Normally Open
(1)
Average rating 10 out of 10 ( based on 1 review )

Excellent RX/TX

Review by Henry on 3/24/2015

This device worked perfectly with no problem. I am using it as a garage door controller and has amazing range. I can operate door from the FOB on my key ring from inside my car at over 15 meters. Interestingly it came with a battery !

Write a Review