CCTV Video PTZ Camera/ Cable Tester Pro

Price: $305.00
  • SKUDVR-ST893
  • 3.5" high definition LCD display, 960(H)× 240(V)resolution
  • DC12V/1A power output for camera
  • Video Signal Intensity Testing
  • Audio input testing
  • PTZ control. Pan/tilts the P/T unit, zooms in/out the lens, adjusts the focus, aperture and sets and calls the preset position
  • Video displaying. Automatically adapts and displays the video format of NTSC/PAL
  • LCD Brightness/Contrast/Color Saturation adjustable
  • Video Generating, The PAL/NTSC multi-system colorbar video generator (seven-system)
  • Data analysis. Captures and analyzes RS485 controlling data to help the technicians to find out the problem
  • Cable testing. It is powerful in testing LAN cables, measuring the connecting status ,displaying the sequence of
  • connection and the NO. of the LAN cable
  • Multi-interface and Multi-baudrate. Support RS232 ,RS485 and RS422 interface; baud rate ranging from 150, 600 to 19200bps
  • Multi-protocol. Supports more than twenty PTZ protocols. For example, PELCO-P, PELCO-D, SAMSUNG etc
  • PTZ address scanning, search up the ID of PTZ camera
  • Lithium Ion Polymer Battery (3.7V DC3000mAh). Adopts advanced power control and protection circuit. High power-efficient, energy saving and environmental protection. It can last 12 hours for normal use after charging for 4 hours
Model ST894
Video Test
Signal mode NTSC/PAL (Auto adapt)
Display 3.5" digital TFT-LCD ,960 x 240 resolution
LCD adjustment Brightness, Contrast, Saturation adjustable
Video IN/OUT 1 channel BNC Input & 1 channel Output
Video Output Mode 1.0 Vp-p
Video Level Test
Level test Video singals measured in IRE or mV
PTZ Controller
Interface mode RS232, RS422 simplex and RS485
PTZ Protocol Compatible with more than 20 protocols such as PELCO-D/P, Samsung, Panasonic, Lilin, Yaan, etc.
Baud Rate 150,300,600,1200,2400,4800,9600,19200bps
Video Signal Generation
Color bar generation Output 1 channel colorbar video signal for testing monitor or video cable
UTP CABLE TEST
UTP cable test Tests UTP cable connection status and displays on the screen. Read the number of the test box
PTZ Data Capture and Display
PTZ Data Test Capture and analyze the PTZ data sent from the controlling device
PTZ address scan Search up the ID of PTZ camera
Digital Multimeter
Power Output
DC12V 1A power output Output DC12V 1A power for camera
Audio Input test
Audio input test Tests the pickup and other audio equipments on the front-end
RS485 data analyst
Data Monitor Capture and analyze the command data from controlling device
POWER
Power Adapter DC5V, 2A
Battery Built-in 3.7V Lithium polymer battery ,3000mAh
Rechargeable 3-5 hours for full charging, working time lasts approximately 12 hours
Low Consumption Energy saving technology
General
Working Temperature -10℃~50℃
Working Humidity 30%-90%
Dimension 175mmx94mmx36mm
Weight 500g
Write a Review