Dual Display PID Temperature Controller. Supports Fahrenheit, Celsius ('C & 'F). Ideal for Furnaces, Kilns, Ovens & sous-vide


Other products by : Lightobject
 Item# :   ETC-JLD612-A
130 units available
  MSRP :   $95.00
  Price :   $32.50
 Quantity :  
 

Description 

Key Features of the JLD612 PID (Proportional Integral Derivative) Temperature Controller 
 

 

Works great for DIY Sous-Vide system!

 

  • 3 different modes of Auto-Turning with PID Algorithms
  • Dual Display Setpoint and Current
  • Fahrenheit (F) and Celsius(C) -1999 ~ 9999
  • Individually programmable PID control parameters
  • 7 Different Dual Output
  • Support 0.1degree resolution with pt-100 thermocouple
  • Low defective rate >>2%

 

Specification

  • Power:AC(85V~265V) or DC(85V~360V)
  • Two display: Setpoint and current
  • Dual output SSR(8V, 40mA), Relay(3A 120V AC)
  • Multiple sensor: T,R,J,B,S,K,E,Wre3 ~ Wre25 , PT100, Cu50
  • Accuracy: 0.2%
  • Dimensions: DIN: 1/16 (48mmX48mmX82mm)
  • Warranty: 6 months


(Note: Thermocouple is not included*)


What is a PID? Click >>Here <<

Model JLD612
Description Dual Display PID Temperature Controller
Range -1999 ~ 9999
Type Fahrenheit,Celsius
Output SSR,Relay

Reviews

Average Rating:
(based on 4 reviews)

Showing 4 Reviews:

RatingReviewerReview
by Warlocks Innovations
on 3/21/2018
ETC-JLD612-A PID CONTROLLER
WE HAVE USING THIS PID for 7 years and have not needed to replace any.. It is easily programmable and that easy to use as well! highly recommended to provide accuracy/ precision of temperatures up 2250F .. thank you to staff for packaging and sending on time !!
by maxx123
on 1/17/2018
high quality
For a PID this is a very reliable controller to use. I have bought a few knock-off Rex-c100 off eBay that is very poor workmanship. unstable. dangerous I use mine to control the temperature of a used oil veggie burner (waste oil burner). the TET612 or JLD612 is stable, easy to program. very well put together. my kick in temp is 180f to 200f to get the canola oil flowing like water. Do not waste your time with Rex-c100 junk (dangerous) penny wise pound foolish Cheers
by Andy
on 7/26/2017
Good quality for great price.
I take this controllers not a first time, they work stable, accurate and reliable in most general applications. Using them mostly with pilot research equipment.
by Tan
on 7/18/2013
Good PID, meh manual.
The controller itself works great, I've had mine for about 3 years with a 1m K thermocouple. Hook up is easy to SSR's (use heatsinks!). Programming modes can be a little difficult but its easier if you write things down. Adjusting the feedback loop in larger and slower environments takes some knowledge in that (which I don't have). The auto tune works well on soldering irons and ovens or other small systems that react quickly which is what I use it for. Its very accurate and stays set when you turn it on/off. It could be used for cooling or the alarm outputs can trigger fans or vents. Powerful little box.
Review and Rate this Item