AWC608 DSP Upgrade Kit for D/K40 Small CO2 Laser Machine

(7)
Price: $497.90
  • SKULSR-K40DSPKIT

AWC608 DSP upgrade kit for D/K40 small CO2 laser machine

  • 20mm 18mm 15mm Laser Head w/Air Assist. Ideal for K40 Machine - ($22.50)
  • DC 24V 5A Switching Power Supply. Good for CNC stepping motor and water pump - ($30.00)
  • Emergency Push Button Switch with lock - ($9.00)
  • 3 Digit Mini Blue LED DC 100mA Meter. Ideal for CO2 Laser Power Indicator (100mA) - ($11.00)
  • 2 Wire Limit Switch/Sensor Cable - ($3.50)
  • Proximity Limit Sensor Switch (C2) - ($2.00)
  • Single Micro Limit Sensor Switch B1 - ($1.00)
  • 2405S DC-DC 5V (2Watt) Isolated Power Module. Ideal for 24V system - ($8.50)
  • 5X8 Silicone Flex Tube for Air Assistance or Water Cooling - ($3.90)
  • Mini 2 Phase 1.5A 1-Axis Stepping Motor Driver - ($58.00)
  • AWC608 Commercial DSP CO2 Laser Engraving/ Cutter Controller Card - ($345.00)
The product is currently out of stock, current quantity is 0

This is a complete upgrade kit for the small laser machine K40 Co2, also named D40. It can also apply to other small laser machines of similar specifications.  After an upgrade is completed, the K40 will become a great machine that produces detail images from engraving. Plus, you can do precise cutting on the same or separate layer.

 

 

Items included:

 

 

  • AWC608  DSP Controller Card for CO2 Laser Engraving/Cutter
  • DC 24V 5A Switching Power Supply. Good for CNC stepping motor and water pump
  • 18mm Laser head w/ air assisted. Ideal for K40 machine
  • Two(2) Mini 2 Phase 1.5A 1-axis Stepping Motor Driver
  • Emergency Push Button Switch with lock
  • 3 digit Mini Blue LED DC 100mA meter. Ideal for CO2 Laser power indicator(100mA)
  • 3 wires Limit switch/ sensor cable
  • 2 wires Limit switch/ sensor cable
  • Proximity Limit Sensor Switch (C2)
  • Single Micro Limit Sensor Switch B1
  • 2405S DC-DC 5V (2Watt) Isolated Power Module. Ideal for 24V system
  • 5X8 Silicon Flex Tube for Air Assistance or Water Cooling

Phone support: If you would like to talk to our expeirenced skilled technician,  phone support is available here.  Please purchase the service before calling.

The upgrade procedure is posted on the support forum HERE

(7)
Average rating 9 out of 10 ( based on 7 reviews )

Good Kit

Review by afacuarius on 12/19/2014

for some time I spend looking for kit like this has everything necessary for the realization of a professional upgrade, do not hesitate to purchase immediately in forum much information for installation is located. I recommend this kit ----------------------- Durante algún tiempo me la pase buscando un kit como este, tiene todo lo necesario para la realización de una actualización profesional, no dude en hacer la compra de inmediato, en el foro se encuentra mucha información para su instalación. Recomiendo este kit

Other Retrofit Possibilities?

Review by Peb0 on 11/25/2014

Is there a reason this specifically indicates k40 laser upgrade? Couldn't it be retrofit into any other various sized laser?

K40 Upgrade

Review by Mark on 3/28/2014

Had a lot of fun installing this kit. Not completely easy to install, but Marco and the support group were very helpful. I was hesitant to spend more on this kit than I spent on the Laser Engraver. My wife really wondered if I would be able to get the thing working again, and I did hit a few bumps putting it together. When I was finally done I felt quite a sense of accomplishment, and I am fluent with the machine should I encounter any problems in the future.

AAA+++

Review by Spektrum on 2/20/2014

This is an excellent kit for upgrading the cheap Chinese laser engraver/cutter. The customer support is great. My email questions about the kit were answered in a timely manner and details were clearly explained to me. The kit only took 6 days to arrive in Australia!

how to install theDSP upgrade kit for D/K40 small machine

Review by sky on 5/21/2013

I ordered the kit but i need some instructions

Write a Review