Exhaust Fan for Laser Engraving Cutting Machine

(2)
Retail Price: $135.00
Price: $95.00
  • SKUEPS-EF-550W60H
21 units available
- +

Exhaust Fan for Laser Engraving Cutting Machine. It provide a great amont of suction to clean out the smoke and smell out of machine.
Specification

  • Input: 110V AC 60HZ
  • Flow Rate: 1080m3/h or 635CFM
  • Power: 550Watt
  • Current: 5A max
  • Size: 16" X 17" x 11"
  • Inlet size: 5.8"
  • Outlet size:  5.8"
  • Note: No hose/pipe is included
  • Warranty: six months

(2)
Average rating 4 out of 10 ( based on 2 reviews )

This blower leaks

Review by Gareth on 9/23/2018

The blower is very powerful. There are a couple of issues I have with it, the first is thatit does not come with a US Plug, it comes with a US travel adapter on the plug. Secondly, there is a silly plate spot welded on the out port that restricts the air flow down to a 2 inch hole.and thirdly, the thing leaks air from all the joints including the silly plate welded on the out port. I had to silicone the impeller access plate, the silly welded plate and the bolts that held the welded plate, The picture does not match exactly the item sent.

Poor quality

Review by Tim Robertson on 12/26/2018

I purchased new in November 2017 and posted review at that time. Had to modify base to fit existing blower because China parts bolt pattern is not same. Blower motor failed December 2018. This is same thing that happened with original China blower which I was replacing where motor failed after about 14 months. I will be looking for US made replacement. Things like this keeps me from making any profits. I use my laser only part time and my machine only has 32.4 hours total run-time. I found out today the warranty is 6 months and this is most likely same for all vendors so not blaming LightObject but the blower is very poor quality if it can't run longer than that. Reply from LO: Hi Tim, so sorry to hear that the fan broke earlier than it should. We're trying our best to find better products. Contact us if you need help from us. Regards, Marco

Write a Review