The LO-Legend is a professional grade engraving/cutting machine with the latest 4th generation DSP technology - the LO T9 DSP Controller with Color Display! The T9 supports real-time simulation and PPI. The LO T9 Controller supports up to 200 art files by uploading from a USB memory stick or any other USB device which is very convenient because it saves time and the cost of a dedicated PC system for the machine.
An air cooling system is installed inside of the LO-Legend to improve performance. The laser head is installed on a roller wheel so higher speed can be achieved.
The LO-Legend comes with the powerful yet user-friendly software - RayCam v1.9 - that enables the user to work right after the machine is set up. If you need to handle more complicated, detailed artwork our software is capable of integrating CorelDRAW, AutoCAD, Inkscape and more. With these features, the LO-Legend will engrave/etch whatever you can dream up and the 130 Watt Laser Tube is powerful enough to cut through 1” plywood! What you see on the screen is what you will get from your project!
The software is capable of handling vector and raster graphics at the same time through different layers of setup. A list of files supported: DXF, PLT, DST, DSB, BMP, GIF, JPG, PNG, MNG, ICO CUR, TIF, TGA, PCX, JBG, JP2, JPC, PGX, RAS, PNM, SKA, RAW.
Optional High Precision Rotary (model ECNC-RTY9001) is available to make it capable of engraving round objects like wine bottles, wood trim, cups, etc.. Almost any round shaped object is possible! The High Precision Rotary (ECNC-RTY9001) is $425.
The LO-Legend comes with a "Power Z Table"! Now you can control the Z table up/down to accommodate various material sizes -up to 150 pounds! You can also take out the honeycomb flatbed to give you up to another 6" of room/depth.
Shipping & Handling to US customers in 48 states ranges from $850 to $1200 (depending on your location). When you check out our shipping estimator will tell you the actual shipping cost to your location.
Note: we accept bank transfer or money order only. Full payment is required prior to shipment.
Return/Refund Policy is HERE
CO2 tube Power: 130Watt
Tube Trigger Volt: 28KV
Tube Operating Volt: 22KV
Operating voltage: AC110V 60Hz, Optional AC 220V,60Hz
Laser Tube Length: 1650mm(65")
Working area: 1200mm x 900mm (47.2" x 35.4") with +/- 2mm
Pass-through size:(back): 51"x1.25"
Power Z table: Yes (200mm)
Beam combiner built in (red dot laser pointer):Yes
Precision: 0.01mm , resolution: 0.05mm
Speed: 750mm/s for X , 500mm/s for Y during engraving,
Engraving deep: 5~8mm. Multiple pass is ok
Wood cutting: up to 25.4mm (1") and 25.4mm(1") acrylic.
Water Protection: Yes
DSP Controller: Comes with a LCD unit for motion control and power control
OS: Windows 2000/XP/Vista/7/8/10 (32 bit/64 bit)
Interface: USB port or Ethernet (RJ45)
USB memory drive support: Yes
PPI support: Yes
Micro step panning: Yes
Real time simulation: Yes
Cooling: Water Cool(not included - we recommend the LightObject Brand of Chillers)
Application supported:CorelDRAW X4,X5,X6,X7,X8 AutoCAD 2004 or higher version, Inscape and more!
Machine Size LXWxH: 1800mm*1600mm*990mm (71" x 62" x 39")
Machine Weight: 340Kg/750lb
Shipping Weight: 408kg/900lb