The Ranger is an entry level machine but professional grade engraving/cutting machine.
It comes with its own coolant system so no chiller is required.
The Ranger comes with the powerful and user-friendly software that enables the user to work right after the machine is set up. If you need to handle more complicated, detailed artwork our software is capable of integrating CorelDRAW, AutoCAD, Inkscape and more. With these features, the Ranger will engrave/etch whatever you desire with 35W . What you see on the screen is what you will get on your project.
The software is capable of handling vector and raster graphics at the same time through different layers of setup. A list of files supported: DXF, PLT, DST, DSB, BMP, GIF, JPG, PNG, MNG, ICO CUR, TIF, TGA, PCX, JBG, JP2, JPC, PGX, RAS, PNM, SKA, RAW.
A quality made honeycomb flatbed allows for better heat release from the object
CO2 Power: 35W by default (40W 850mm optional)
Max current for laser tube: 16mA
Laser tube Length: 720mm
Operating voltage: AC110V 60Hz (Optional AC 200~220V, 5A, 60Hz)
Working area: 600mm x 400mm(23.6" x 15.7")
Beam combiner built in (red dot laser):Yes
Power Z table: Yes
Precision: 0.01mm , resolution: 0.05mm
Speed: 750mm/s for X, 400mm/s for Y during engraving,
Engraving depth each pass:1mm for wood or 0.5mm for acrylic/plastic.
Woodcutting: up to 3mm
DSP Controller: Ruida R5
OS: Windows 2000/XP/Vista/7/8/10 (32 bit/ 64 bit). Mac with optional Lightburn software
Interface: USB port
USB memory drive support: Yes
PPI support: Yes
Micro step panning: Yes
Real time simulation: Yes
Cooling: Internal water cycling
Application supported:CorelDRAW X4,X5,X6,X7,X8 AutoCAD 2004 or higher version, Inscape and more!
Laser machine weight: 200lb, shipping weight: 350lb
Machine Dimension: 43.5 x 28 x 16
Exhaust hole 80mm. 110mm dia. Hose included.
One year warranty for the machine and laser tube.