Solo 45W CO2 Laser Engraving Machine

Retail Price: $3,995.00
Price: $3350.00
- +

High-Speed Desktop Laser Engraving/Cutting Machine developed by LightObject with the latest 4th generation DSP technology!  Lightburn supported

The LO-Solo comes with the LO-E5 DSP controller that supports real-time simulation and PPI. It is designed to be compact in size but powerful enough to cut through 1/3" plywood or 1/4" acrylic! Ideal for hobbyists, woodworkers or school projects and so much more!

The controller supports up to 200 art files by uploading from a USB memory stick or any other USB device which is very convenient because it saves time and the cost of a dedicated PC system for the machine.

The LO-Solo comes with the powerful and user-friendly LightObject developed software - LaserCAD - which is capable of handling vector and raster graphics at the same time through different layers of setup. The LO-Solo can engrave very fine lines and characters as well as cut through products of various depths!

A list of files supported: DXF, PLT, DST, DSB, BMP, GIF, JPG, PNG, MNG, ICO CUR, TIF, TGA, PCX, JBG, JP2, JPC, PGX, RAS, PNM, SKA, RAW. 

Power table 'Z' is included - a $195.00 value! Now you can control the Z table up/down (up to 3.5" in Z direction) to accommodate various material sizes.  You can also take out the honeycomb flat bed to give you up to another 2.5" of room/depth. The Power Z Table can hold up to 8 lbs.


Red dot laser pointer included. A $125 value! You can see where the laser is going to hit ahead of time. 



To download the software you must register on our forum, once the admin approves you.


after you have been approved click on this link to download.




Shipping & Handling to US customers in 48 states ranges from $350 to $750 (depending on your location).  When you check out our shipping estimator will tell you the actual shipping cost to your location. 

Note: we accept bank transfer or money order only. Full payment is required prior to shipment.

Return/Refund Policy is HERE

CO2 Power: 45Watt, peak 50W 
Tube Trigger Volt: 22KV
Tube Operating Volt: 16KV
Operating voltage: AC 110V, 4A, 50/60Hz
Current: 16mA (18mA Max)
Tube Length: 40" (1000mm)
Working area: 19.6" x 11.8" (500mm x 300mm)
Precision: 0.01mm , resolution: 0.05mm
Speed: up to 47" second (1200mm/s) max
Wood cutting: up to 10mm/s on plywood with 6mm (1/4")
Water Protection sensor: Yes
Mirrors: 19mm SI mirror
Focus lens: 15mm Lens  wiht F50.8mm focal length
DSP Controller: Comes with LO-E5 DSP controller for excellent motion and power control
OS: Windows Windows XP/Vista/7/8/10 (32 bit/ 64 bit)
Interface: USB port
USB memory drive support: Yes
PPI support: Yes
Mico step panning: Yes
Real time simulation: Yes
Cooling: Water Cool (not included, we recommend the LightObject 600w Chiller)
Application supported: CorelDRAW X4,X5,X6,X7,X8 AutoCAD 2004 or higher version
Machine dimension: 41" x 27.5" x 16.5" (1041mm x 700mm x 420mm)
Net Weight:  145lbs
Shipping weight: 198lbs

Write a Review