High-Speed Desktop Laser Engraving/Cutting Machine developed by LightObject with the latest 4th generation DSP technology! LightBurn supported
The LO-Solo comes with the LO-E5 DSP controller that supports real-time simulation and PPI. It is designed to be compact in size but powerful enough to cut through 1/3" plywood or 1/4" acrylic! Ideal for hobbyists, woodworkers or school projects and so much more!
The controller supports up to 200 art files by uploading from a USB memory stick or any other USB device which is very convenient because it saves time and the cost of a dedicated PC system for the machine.
The LO-Solo comes with the powerful and user-friendly LightObject developed software - LaserCAD - which is capable of handling vector and raster graphics at the same time through different layers of setup. The LO-Solo can engrave very fine lines and characters as well as cut through products of various depths!
A list of files supported: DXF, PLT, DST, DSB, BMP, GIF, JPG, PNG, MNG, ICO CUR, TIF, TGA, PCX, JBG, JP2, JPC, PGX, RAS, PNM, SKA, RAW.
Power table 'Z' is included - a $195.00 value! Now you can control the Z table up/down (up to 3.5" in Z direction) to accommodate various material sizes. You can also take out the honeycomb flat bed to give you up to another 2.5" of room/depth. The Power Z Table can hold up to 8 lbs.
Red dot laser pointer included. A $125 value! You can see where the laser is going to hit ahead of time.
Shipping & Handling to US customers in 48 states ranges from $350 to $750 (depending on your location). When you check out our shipping estimator will tell you the actual shipping cost to your location.
Note: we accept bank transfer or money order only. Full payment is required prior to shipment.
Return/Refund Policy is HERE
CO2 Power: 60Watt, peak 65W
Tube Trigger Volt: 22KV
Tube Operating Volt: 16KV
Operating voltage: AC 110V, 7A, 50/60Hz
Current: 18mA (22mA Max)
Tube Length: 47.3" (1200mm)
Working area: 19.6" x 11.8" (500mm x 300mm)
Precision: 0.01mm , resolution: 0.05mm
Speed: up to 47" second (1200mm/s) max
Wood cutting: up to 15mm/s on plywood with 6mm (1/4")
OS: Windows Windows XP/Vista/7/8/10 (32 bit/ 64 bit)
Interface: USB port
USB memory drive support: Yes
PPI support: Yes
Mico step panning: Yes
Real time simulation: Yes
Cooling: Water Cool (not included, we recommend the LightObject 600w Chiller)
Application supported: CorelDRAW X4,X5,X6,X7,X8 AutoCAD 2004 or higher version
Machine dimension: 41" x 27.5" x 16.5" (1041mm x 700mm x 420mm). Extension case is required and installed.
Net Weight: 145lbs
Shipping weight: 198lbs