SPT C45 50W CO2 Sealed Laser Tube

SPT
SKU:
LSR-SPT40W850MM
$253.00
Bulk Pricing:

Below are the available bulk discount rates for each individual item when you purchase a certain amount

  • Buy 2 - 3 and get 5% off
  • Buy 4 - 7 and get 7.5% off
  • Buy 8 - 24 and get 10% off
  • Buy 25 or above and get 15% off
(7 reviews)
Width:
40.00 (in)
Height:
10.00 (in)
Depth:
10.00 (in)
Current Stock:
Adding to cart… The item has been added

**Free Shipping for Continental US Only**

LightObject is proudly partnered with SPT Laser Technology Co. to be a North American distributor of SPT-branded CO2 laser tubes. SPT tubes are highly regarded in the laser industry for their exceptional optics quality, cutting power, and stability.

This 45-watt model SPT tube is universal and can work with virtually any CO2 laser engraving/cutting machine that fits, but is an ideal candidate for replacing a CO2 tube of similar power/length.

This high-output tube is can handle up to 20mA at 11,000 volts. We recommend pairing this SPT laser tube with our LightObject 600-watt chiller to ensure ample cooling capacity.

The C collection CO2 laser tubes have high optical quality, strong cutting force, and high stability.  It also provides stable laser sources for high-demand laser machinery manufacturers.

Why SPT Laser

Click to know about SPT

Why buy Laser Tubes from LightObject?

1) We're located in USA (Sacramento, California). No U.S. Customs issues

2) We provide great tech support. We are knowledgeable, and we know what we're selling.  Check out our support forum at LightObject.info.  There you can ask us questions, tap into our vast customer network for support and visit our FAQ section as well!

3) Fast turn around time for tube replacement

4) Competitive pricing because we deal directly with the manufacturers

5) High quality and professional packing

6) We test each tube with industry grade laser power meter before it is shipped from California

Specification

  • Power: Rated 50W (55W peak)
  • Triggering Voltage: 16-18KV
  • Operating Voltage: 10-11KV
  • Recommended Working Current: 13~15mA, max 18mA, peak: 20mA
  • Length: 850mm (33.5")+/- 5mm
  • Diameter: 50mm (2")+/- 1mm
  • Water Cooling: 10L/m
  • Water temperature: 15~25'C(59-77F)
  • Warranty: 9 months  

Note: 600W water chiller with a compressor (refrigerant) is highly recommended for cooling.

Shipping

Default shipping method is UPS ground.  Please contact us for the price if faster service is needed.

Additional shipping cost will be charged outside the continental 48 states in the US. Please contact us for shipping cost before placing the order. 

Courtesy reminder

Any damage that happens on the shipment; the buyer must report to us within 3 business days after receiving it. If failed to do so; this will result in the rejection of all claims. Customers must file a report to the carrier and keep all shipping materials handy for inspection. We're not responsible for any internal cracked after receiving, any damage caused during transportation covered by insurance.  The buyer is responsible for the shipping cost of a replacement tube if the order date is out of 30 days. Warranty acceptance or denial is subjected to the decision made by the tube manufacturers. Lightobject is not responsible for a denial under any circumstance.


Excellent Tube for FSL replacement

Used this tube to replace the default Full Spectrum Laser 5th-Gen 20"x12" tube, (which is actually a 35W I think). I run this tube at just 60% of current as the old tube and it cuts much better. Slightly longer at 850mm than the default tube so had to open up the side of the housing to accommodate. Excellent packaging with soft foam and very reasonable price to Canada. Very impressed!

Review by Alex on 8/12/2019

Reviews

  • 5
    CO2 Laser Tube

    Posted by Deluna on Oct 31st 2023

    This tube is fantastic compared to my old tube. Its cuts very differently than my old tube. The cuts are clean and sharp. I am glad I purchased this tube. I would purchase again if needed.

  • 5
    Rockin it

    Posted by Scott Bowen on Apr 1st 2022

    Hungry for more power, I bought this 45W tube to replace the original tube in my 2021 Muse Core. Yup, I had to cut a hole in the side of the machine to make it work (it sticks out about 6 inches) but it's all good. I built an enclosure to keep it safe. I have far more power, now cutting at 85% speed what used to need 50% speed. Go big or go home, right?

  • 5
    45 watt Laser tube

    Posted by Darren Atkins on Jan 6th 2022

    replaced the original tube in a Full Spectrum PS20, a little longer but out performs the original by far. Great customer service and got it in Hawaii in 4 days during Christmas season.

  • 5
    Great purchase

    Posted by Alex on Jul 23rd 2021

    Bought this to replace the factory tube that came with my "50W" Chinese blue laser. Got the tubes swapped today and the laser is cutting about 60% faster than when the factory tube was brand new. I'm very impressed. This tube is about 1" longer than the original, but I had no issues with installing it and didn't have to make any modifications.

  • 5
    Excellent Tube for FSL replacement

    Posted by Alex on Feb 11th 2021

    Used this tube to replace the default Full Spectrum Laser 5th-Gen 20"x12" tube, (which is actually a 35W I think). I run this tube at just 60% of current as the old tube and it cuts much better. Slightly longer at 850mm than the default tube so had to open up the side of the housing to accommodate. Excellent packaging with soft foam and very reasonable price to Canada. Very impressed!8/12/2019

  • 5
    Great Tube for eBay 50W Laser (Shenhui SH-G350)

    Posted by Robert on Feb 11th 2021

    My 50W eBay laser suddenly stopped cutting, so I ordered this tube and a few days later it was delivered to my office. Unfortunately, it turned out that my power supply was bad, not my tube, but since the tube was 3 years old I guess it was time for a replacement anyway. This tube works great and fits perfectly, I didn't even need to do any alignment and it started cutting as well as the old one right away.10/26/2018

  • 5
    Great product

    Posted by Timothy on Feb 11th 2021

    Light object made getting a new tube easy. So far the tube has exceeded my expectations 9/20/2018