V26 from "SPT" provide you enough power to cut through 40mm acrylic or performing high speed on metal or plywood
This is an ideal tube for the 'Hybrid' laser machine to cut metal and non-metal.
*Dual power supplies are included*220V
- Power: rated 200W, 220W(peak)
- Triggering Voltage: 55-57KV
- Current: 30mA, 35mA max
- Beam divergence: 3.1mrad
- Beam spot: 7.0mm
- Length: 1800mm/71 inch
- Diameter: 80mm/ 3.18inch
- Water Cooling required: 20~25'C
- Water Cooling: 1800W water chiller is required LO-2700
- Warranty: 10 month
Note: 180Watt or higher power AC water chiller is required for cooling or warranty voided.
Over current will void the warranty
Courtesy reminder: Any damage that happens on the shipment; the buyer must report to us within 3 business days after receiving it. If failed to do so; this will result in the rejection of all claims. Customers must file a report to the carrier and keep all shipping materials handy for inspection. We're not responsible for any internal cracked after receiving, any damage caused during transportation covered by insurance. The buyer is responsible for the shipping cost of a replacement tube if the order date is out of 30 days. Warranty acceptance or denial is subjected to the decision made by the tube manufacturers. Lightobject is not responsible for a denial under any circumstance.
Although the edge finish is not perfect at such a high speed, it is good for production of rough cut. At max current, it can cut 1/4inch wood at 55mm/s.