LightObject 1600W CO2 Laser Machine Chiller/Cooler (AC110V)

click on thumbnail to zoom
Other products by Lightobject
Item #: WC-LO1600WSH1V
Reg. Price: $750.00
Our Price: $635.00
The product is currently out of stock, current quantity is 0


LightObject Water Chiller for CO2 Laser Machine (AC110V 60Hz)  

High efficiency and stabiliy are the most important requirement for a water chiiler. Without help from a microcontroller, it is an impossible task. The LO-1600W comes with a sophisticated microcontroller feedback system to get a fast response. All setup tasts can be performed through a large LCD screen control panel. It is easy to read and no tedious programming tasks needed.


The LO-1600W is ideal for use on a machine with a single 80W~180W tube or with dual 80W~130W tube*. It is a high performance water chiller with an excellence QC control. Low defective rate, quality made, and better price that you can hardly find one in the market.


  • Environment friendly freon R410A
  • Microcontroller Control System with LCD touch panel
  • Compact design with 0.3'C temperature accuracy
  • Compressor delay circuit, over-current protection
  • Over-heat temperature alert, water flow protection


  • Cooling Power: 1600W
  • BTU: 5084Btu/h
  • Input power: AC 110V, 60Hz
  • Current: 7.5A
  • Compressor power: 0.93HP, 680Watt
  • Freon: R410A
  • Pump power: 30W
  • Lift (cut off) : 5m (16ft)
  • Rate: 10L/min, 158GPH
  • Inlet/Outlet size: 10mm
  • Ambient Temp: ≤35'C (95'F)
  • Chilled Water Temp. 18~30'C(64.4~86'F)
  • Water tank capacity: 1 gallon
  • Weight: 30KG (65lb)
  • Dimensions: 550×280×430mm (21.6" x 11.0" x 17")


Due to the weight of this product it must be ordered individually and not combined with any other products.

1600W water chiller manual can be downloaded from here.





Average Rating:
(based on 2 reviews)

Showing 2 Reviews:

by Ken
on 5/2/2017
Good value for the price.
Received product in a timely manner. Well packaged and protected for shipment. Note inside box directed me to website for literature. Had to call customer service to locate manual because the one offered on the website is not necessarily for the product that I received, it did the job though. Product maintains temperature as expected. Fan is quite loud but bearable.
by Skyline Workshop
on 7/15/2016
Easy to use, low maintenance
This chiller has worked well for cooling our laser tubes. We've used this chiller on RECI 100w, SPT 130W, SL 130W CO2 laser tubes and have had no issues. It holds a stable temperature, has two filters that are removable for cleaning, and easily settable temperature thresholds. We have been operating two of these almost continously for a year (we don't ever shut them off) and have had no issues at all.
Review and Rate this Item

Top Sellers

Heat sink for 25A SSR
Price: $4.25
Heat sink for 40A SSR
Price: $6.50
Heat sink for 60A 90A SSR
Price: $9.00