This is our latest design with PID temperature controller. The LO-1600W chiller is an ideal candidate for a laser machine running a laser tube with a power range from 130W to 180W. It can handle two 130W tubes that are running simultaneously!
- 20% cooling performance improvement
- Integrated temperature controller installed
- Better temperature control +/- 0.5'C
Environment-friendly refrigerant R410A
PID temperature controller
Over-heat temperature and water flow alert
Cooling Power: 1600W
Power consumption: 772W
Input power: AC 220V, 50Hz
Full power current: 7.2A
refrigerant : R410A
Pump power: 30W
Pump lift (cut off) : 10m (33ft)
Pump flow rate: 19L/min, 300GPH
Inlet/Outlet size: 10mm
Ambient Temp: ≤35°C (95°F)
Chilled Water Temp. 18~30°C(64.4~86°F)
Water tank capacity: 9L
Weight: 24kg (52lb)
Dimensions: W405×D470×H480mm (16" x 18.5" x 19") note: depth measured from blue cap
Warranty - 12-month limited warranty from date of purchase.
Due to the weight of this product, it must be ordered individually and not combined with any other products.
1600W water chiller manual can be downloaded here.