This is our latest design with PID temperature controller. The LO-2700W chiller is an ideal candidate for a laser machine running a laser tube with a power range from 130W to 300W. It can handle two 150W tubes that are running simultaneously!
- 20% cooling performance improvement
- Integrated temperature controller installed
- Better temperature control +/- 0.5'C
Environment-friendly refrigerant R410A
PID temperature controller
Over-heat temperature and water flow alert
Due to the weight of this product, it must be ordered individually and not combined with any other products.
2700W water chiller manual can be downloaded here.
- Cooling Power: 1790W
- BTU: 7084Btu
- Power consumption: 950W
- Input power: AC 110V, 60Hz
- Full power current: 9A
- refrigerant : R410A
- Pump power: 50W
- Pump lift (cut off) : 25m (80ft)
- Pump flow rate: 25L/min, 390GPH
- Inlet/Outlet size: 10mm
- Ambient Temp: ≤35°C (95°F)
- Chilled Water Temp. 15~30°C(64.4~86°F)
- Water tank capacity: 9Liter
- Chiller Dimension: 12.5" W x 20"D x 29" H
- Weight: 77lb
- Shipping Dimension: 15.25" W x 23.25" D x 34" H
- Crate Weight: 117lbs
Warranty - 12-month limited warranty from date of purchase.