LO-1600D Dual output water chiller
This is our latest design with PID temperature controller. The 1600 chiller is an ideal candidate for a laser machine running a laser tube with a power range from 130W to 180W. It can handle two 130W tubes that are running simultaneously!
Highlight:
- Dual output for two laser tubes
- 20% cooling performance improvement
- Integrated temperature controller installed
- Better temperature control +/- 0.5'C
Features:
Environment-friendly refrigerant R410A
PID temperature controller
Compact design with 0.1'C temperature accuracy
Compressor delay circuit, over-current protection
Over-heat temperature alert, water flow protection
Specification
Cooling Power: 1600W
BTU: 5084Btu/h
Input power: AC 110V, 60Hz
Current: 7.5A
Compressor power: 0.93HP, 680Watt
Refrigerant: R410A
Dual pumps, each pump's spec:
Pump lift (cut off) : 10m (33ft)
Pump flow rate: 19L/min, 300GPH
Inlet/Outlet size: 10mm
Ambient Temp: ≤35'C (95'F)
Chilled Water Temp. 18~30'C(64.4~86'F)
Water tank capacity: 7L
Package Weight: 27KG (60lb)
Dimensions: W405×D470×H480mm (16" x 18.5" x 19") note: depth measured from blue cap
Warranty - 12 month limited warranty from date of purchase.
Due to the weight of this product, it must be ordered individually and not combined with any other products.
1600 water chiller manual can be downloaded from forum.
