132GPH threaded Small DC12V Brushless Submersible Water Pump

(1)
Retail Price: $45.00
Price: $17.50
  • SKUEWP-D40E1250
239 units available
- +

This is a quality made, small DC submersible water pump with high pressure output. It can be used in the water or it can run dry as long as water is flowing. It's built by a brushless motor so that it's more quiet and last longer than a non-brushless water pump. Plus,it will not generate any 'electric spark' (noise) like a brush type motor does.

Other application: CO2 laser cooling, Indoor/Outdoor water fountain, Jet propulsion for Boat(toy) water gun, and other water circulation system.


Specification

Power: DC12V
Output: 8.3.0L/m @12V
Vertical cut-off: 5m (16ft)
Shaft: Ceramic
Current: [email protected]
Intake: 13.8mm Dia. 1/4" threaded
Outlet: 10mm Dia. 1/4" threaded
Life span: > 20,000hrs @ 1600rpm~10,000rpm
Noise: << 40dB
Working Temp: 70'C
Envir Temp: <40'C
Size(L*W*D): 3.44"x2.5"x1.92" (86mm X 63mm X 48mm)
Weight (net): 7.0oz


Warning:
Do not let it run dry without water flowing. To those who want to use it with a solar power battery, please make sure to install a 12V regulator as the output from a solar panel higher than 12V (as high as 22V) . Warranty will not cover the damage!

How to use:
-Submerse or Inline
-With Solar panel

(1)
Average rating 4 out of 10 ( based on 1 review )

Pump failed

Review by Lew on 8/22/2015

This pump failed after a little over 1 year of very light use. I suspect that if I ran it 2-3 hours every day, it would have lasted about 1 month. I need to find a much more reliable pump. Ans[LO]. You may want to open the cap to clean some dirt there. Note that this pump is designed for fresh water. Where were you using it for? When chloride or mineral stacked up on the spindle, it will block the movement.

Write a Review