Water pump discount

  • Purchase 2000 to 3000 and save 22.5%
  • Purchase 1000 to 1500 and save 17.5%
  • Purchase 400 to 750 and save 15%
  • Purchase 200 to 300 and save 12.5%
  • Purchase 75 to 150 and save 10%
  • Purchase 30 to 50 and save 7.5%
  • Purchase 5 to 20 and save 5%

High Temperature(100C) DC 12V 1.85L/Min (29GPH) Mini Water Pump. Food Grade

Retail Price: $29.00
Price: $12.95
  • SKUEWP-2502HT12V
213 units available
- +

This is a high temperature (up to 105'C) food grade, mini submersible water pump. Ideal for DIY Sous Vide application. The shaft is coated with a layer of ZrO2 (zirconium oxide) to withstand higher temperatures and have better tolerance for acid and alkaline. It's built by a brushless motor to provide a smoother and quieter operation than a brush water pump. Also, it will not generate an 'electric spark' like a brush type does, so it's safer.



Input: DC 12V
Output: 1.85L/min or 29 gallon/hr
Cut off: 1M (3ft vetical lift) @12V
Current: 300mA@12V
Intake Outside Diameter: : 0.354 inch/ 9mm
Outlet Outside Diameter: 0.262 inch/ 6.7mm
Submersible: Yes
Self-prime: No
Life span: > 20,000hrs @ 1600rpm~4200rpm
Noise: << 20dB
Fluid Temp: 100'C/212F (non-submersed)

Ambient Temp: <50C/122F (submersed)

Size(L*W*D): 32mmx22mmx36mm (1.26" X 0.87" X 1.42")
Weight (net): 2.0oz

Suggestion Tubing for inlet:

12mm (ID 9mm) High Pressure Air/ Water flex tube (10ft)
8X12 Silicon Flex Tube for CO2 Water Cooling

Suggestion Tubing for Outlet:

5X8 Silicon Flex Tube for Air Assistance or Water Cooling 8mm (ID 5mm) High Pressure Air/ Water flex tube (10ft)


Note: Do NOT use the tubings above for drinking liquid because the tubings are not food grade tubing.

Do not let it run dry without water flowing. To those who want to use it with a solar power battery, please make sure to install a 12V regulator as the output from a solar panel higher than 12V (as high as 22V) . Warranty will not cover the damage!

How to use:
-Submerse or Inline
-With Solar panel

Average rating 6 out of 10 ( based on 2 reviews )

pump for DIY sous vide

Review by John on 4/6/2016

Do NOT use this for a DIY Sous Vide unit. The more I think about this the madder I get. I built a sous vide unit several years ago, based on this pump. The DIY instructions state:”High Temperature 1L/min mini DC Water Pump from LightObject.com. … and its also rated to 100°C. No pump failure due to high temperatures” For a long time, the add at this site said it was ‘great for sous vide’, although it no longer makes that statement. The pump is the week link. My pumps last from 4 to 6 months. The operating temperature of a sous vide unit is often above 122° F, which is above the ’submersed’ ambient temperature. I don’t know when the specifications changed, but they changed. This pump is NOT self priming, so, given the configuration of the unit, getting this pump to a ‘non-submersed’ but ‘prim-able’ condition is difficult if not impossible. Reply: The pump can support up to 100'C (212'F) fluid without causing damage of the pump. The condition is that you can't submerse the pump in the hot liquid but must install 'in-line'. It is not self-priming that's why you need to install the pump at bottom of the container. We been selling this pump years and years and helped a lot folks for the SouV building. If you don't want to spend $400 ~ $700 for a commercial then DIY is the best way to save money. Of course you need to invest time and effort. Nothing is easy or free. Nothing is impossible.

Can it pump alcohol?

Review by Sam Weber on 1/15/2016

What's the material of the wetted surfaces? I am trying to pump alcohol at about 70 degrees Celsius. Will the pump degrade at this temperature of alcohol? Thanks.

Write a Review