This is a high temperature (up to 105'C) food graded mini submersible water pump. The shaft is coated with a layer of ZrO2 (zirconium oxide ) to withstand higher temperature and have better tolerance for acid and alkaline. It's built by a brushless motor to provide a smoother and quieter operation than a brush water pump. Also,it will not generate an 'electric spark' like what a brush type does, so it's safer.
Input: DC 5~6V
Output: 1.0L/min or 0.264 gallon/min
Cut-off: 1M (3ft ) @6V
Intake outer diameter: 10mm or 0.39"
Outlet outer diameter: 7mm or 0.27"
Life span: > 20,000hrs @ 1600rpm~4200rpm
Noise: << 20dB
Fluid Temp: 100'C/212F (non-submersed)
Ambient Temp: <50C/122F (submersed)
Size(L*W*D): 32mmx22mmx36mm (1.26" X 0.87" X 1.42")
Weight (net): 2.0oz
Suggestion Tubing for inlet:
12mm (ID 9mm) High Pressure Air/ Water flex tube (10ft)
8X12 Silicon Flex Tube for CO2 Water Cooling
Suggestion Tubing for Outlet:
5X8 Silicon Flex Tube for Air Assistance or Water Cooling 8mm (ID 5mm) High Pressure Air/ Water flex tube (10ft)
Note: Do NOT use the tubings above for drinking liquid because the tubings are not food grade tubing.
Do not let it run dry without water flowing. To those who want to use it with a solar power battery, please make sure to install a 6V regulator as the output from a solar panel higher than 6V (as high as 9V) . Warranty will not cover the damage!
How to use:
-Submerse or Inline
-With Solar panel