Lite 400*600 X-Y Stages for DIY CO2 Laser

(4)
Retail Price: $275.00
Price: $225.00
  • SKULSR-KIT4060XY
The product is currently out of stock, current quantity is 0

Entry level X-Y Stages for DIY CO2 laser machine. It come as a kit, so assembly work is required.

-Working area: 400mm x 600mm (16" x 24")

-Outer dimension: 31" x 23 18/"
-Condition: New
-Speed: X:500mm/s, Y:350mm/s
-Packing: Assembly
-Limit switch installed: Yes


Specification
X motor:

  • Type: Nema 17 (42 series)
  • Step angle: 1.8 degree
  • Current: 0.6A
  • No. Wire: 4



Y motor

  • Nema 17 (42 series)
  • Step angle: 1.8 degree
  • Current: 1.2A
  • No. Wire: 4

 

(4)
Average rating 10 out of 10 ( based on 4 reviews )

Inexpensive, not cheap...

Review by Parsifal Druddle on 1/11/2013

Came in on the evening UPS. Nice, very nice for the price. Quick exam - everything straight, everything true. not heavy duty extrusion, but stiff and sturdy - just needs a base. Had bought everything else for a 40w and was struggling with my own x-y stage design. This is a solid, simple design - not fancy - just meat an' taters get-the-job done. Will build and follow up, but first impression is: Why give yourself a headache - buy this, build, get ta lasing! I'm ordering an 80w with XLE 900x1200 next - this entry version rocks! Thanks, Marco!

Sturdy construction, excellent upgrade to a k40

Review by Tim on 3/27/2013

Good quality ali I beams, with well positioned pre drilled holes. An assembly instruction sheet would have saved me hours of experimentation, but I got there in the end. Top tip, the arms of the tensioning brackets go through the slots in the support, took me a while to work that one out. It seems to sit nice and square, and has very little flex even before mounting on a base, I've yet to connect the electrics up, but the addition of home limit switches already assembled in place were a nice touch. Not tried to plug it in and cut anything yet, but it seems like you'd actually get a little more play that the stated size, possibly to allow for the clearance of the head, I was worried that it might only just fit the 300x600 boards I can get but it looks like there will be no wasted material. this does mean that the footprint is bigger than I expected, so make sure you've got a little room to play with. Overall much better quality than the one that came with my K40.

Very Happy

Review by Jeffrey on 4/26/2018

Very straight and strong. No instructions so it's a bit of a challenge but it only goes together 1 way (just a matter of time). Would definitely buy again.

Great Product

Review by Troy on 9/21/2018

I recieved my 600x400 x&y kit today turned up to Australia in great time . The product it self is very worth while as it fits well together . Some instructions would be good but hey - it goes together just like the x&y stages in the K40 . So really it is easy if you have that to work with . Mine will be replacing the bed in the K40 and can all ready see how much lightobjects product is way ahead of that in the K40 standard . Thanks guys you do good services and will continue to buy from you even though im far away the delivery time is always fast .

Write a Review