XLE 900 x 600 XY Stages Complete Kit for DIY CO2 Laser. 2 Year Warranty

(2)
Retail Price: $995.00
Price: $795.00
  • SKULSR-XLE9060XY
3 units available
- +

Professional XLE900 X-Y Stages complete kit comes with: a laser head, mounts, and reduction gear for building a CO2 laser machine. Ideal for making a Commercial laser machine as well as an excellent candidate for the serious DIY hobbyist.

 

We provide a warranty to cover any defective parts within 2 years of purchase!


- 5x 2" anodized aluminum base bars
- 1x "X" slider & 2x "Y" slider
- 2:1 reduction gear box for X & Y
- 2x Nema 23 high torque3-phase 5A stepping motor
- 1x laser head for 25mm mirror and 20mm lens
- 2x mirror mounts for 25mm mirror
- 2x tube mounts
- 2x limit switches
- 4x 3-band axial coupling
- 1x "X" slider track
- 2x "Y" slider track
- 2x stainless steel Y axial

Specification:
-Working area: 900mm x 600mm (36" x 24")
-Condition: New
-Speed: X: 900mm/s, Y: 500mm/s (with driver set to 1/32)


Specification:

X motor:

  • Brand: Lightobject 573S09 3-phase
  • Step angle: 1.2 degree
  • Torque: 128 oz-in
  • Current: 3.5 A
  • Resistance: 1.3 ohm
  • Inductance: 1.7 mH
  • Detent torque: 4 N.cm
  • No. Wire: 3
  • Weight: 0.75Kg (1.65 lb)



Y motor:

  • Brand: Lightobject 573S15 3-phase
  • Step angle: 1.2 degree
  • Torque: 188oz-in
  • Current: 5.8A
  • Resistance: 0.7ohm
  • Inductance: 1.35mH
  • Detente torque: 6.8 N.cm
  • No. Wire: 3
  • Weight: 1.1Kg (2.4lb)

 



YouTube demo



(2)
Average rating 9 out of 10 ( based on 2 reviews )

Good product , works great ... - 1 star for...

Review by Robert on 11/6/2018

Okay, received my kit and utilized the mostly good "instructions" provided via email. Let's start here... 1) I received something similar to what you see in the pictures. My kit had ZERO anodized / powder coated parts. The black parts you see in the photos are not black at all - a little bit of a bummer as it made the kit look a little more professional in my opinion. 2) The images on the site show a home switch at top left - this is not the case. Both home switches are near top RIGHT. Easy mod but I've seen people who prefer top left for the X axis. 3) SOME of my extrusions were a different color. Most were a natural "silver" color that you would get with any other aluminum piece but two were more of a ROSE color. Kinda weird looking but functional. 4) Packaging was less than ideal which is why I'm removing a star. Everything was flopping around inside of the large wooden case upon arrival. This in turn, left me with some scratches that I don't like. Price is good - get one

Nicely done

Review by Joel on 1/31/2019

Despite a couple minor issues, This is a nicely done XY stage that will provide a stable platform. The gantries ride on rails that are far enough apart to be stable and slop free. The tubes and all mounting brackets are thick enough to be flex free. The minor issues, 1 - Two threaded holes were oversized for one of the corner brackets. I was going to use a nut but decided I will just use a bigger screw ( that already fits. issue 2 - The gantries ride on steel rods that are pressed into the aluminum frame rails. On my X rail, the laser head gantry was nice and tight on one end and a little sloppy on the other. I found one rod was not seated properly. A couple taps with a PLASTIC hammer and all was good. So despite the two issues I still consider this excellent and a great platform for a DIY laser system.

Write a Review